Worner Delta BS Separating Stop - With Damping - Stopping one or more accumulated pallet holders at defined stop areas. Application for conveying shock-sensitive or fragile parts. Pneumatic activation with infinitely adjustable damping. The impact force is reduced up to 95%. Can be used at conveyor speeds of 6 m/min to 36 m/min.
Delta BS
up to 60 kg
Design
- Aluminum basic housing with hard-anodizing coating
-Pneumatic separating stop with infinitely adjustable damping
- Optimum damping at pallet holder weights between 1 kg and 60 kg
- Pallet holder loads up to 60 kg permissible (conveyor speed 6 m/min)
- An inductive sensor is after arming cash any time
Delta BS
up to 60 kg
Design
- Aluminum basic housing with hard-anodizing coating
-Pneumatic separating stop with infinitely adjustable damping
- Optimum damping at pallet holder weights between 1 kg and 60 kg
- Pallet holder loads up to 60 kg permissible (conveyor speed 6 m/min)
- An inductive sensor is after arming cash any time
Single acting
When depressurized, the separating stop goes into the lock position via a spring, thus contributing significantly to process safety.
Dual acting
When depressurized, the separating stop remains at the position last moved to, thus increasing the lowering force and enabling higher accumulated loads to be separated and stopped.
Scope/Condition of supply
All accessory parts are supplied mounted, depending on customer request.
Fine adjustment
Damping force and damping speed can be set on the top of the device:
+ = increase damping force
– = decrease damping force
