Worner Delta 0400 Separating Stop - without damping - Stopping one or more accumulated pallet holders at defined stop areas. Use of the separating stop in automatic assembly and handling systems. Activated pneumatically. Separating stop without damping. Can be used at conveyor speeds of 6 m/min to 36 m/min.
Delta 0400
up to 400 kg
Design
- Aluminum basic housing with hard-anodizing coating
- Stop made from hardened steel
- Stop with a thread, untempered
- Pneumatic separating stop
- Pallet holder loads up to 400 kg permissible (conveyor speed 6 m/min)
- Detachable stock with thread drilling to the attachment of custom-designed stop plates
- Simply convertible from EW = single acting to DW = dual acting
Delta 0400
up to 400 kg
Design
- Aluminum basic housing with hard-anodizing coating
- Stop made from hardened steel
- Stop with a thread, untempered
- Pneumatic separating stop
- Pallet holder loads up to 400 kg permissible (conveyor speed 6 m/min)
- Detachable stock with thread drilling to the attachment of custom-designed stop plates
- Simply convertible from EW = single acting to DW = dual acting
Single acting
When depressurized, the separating stop goes into the lock position via a spring, thus contributing significantly to process safety.
Dual acting
When depressurized, the separating stop remains at the position last moved to, thus increasing the lowering force and enabling higher accumulated loads to be separated and stopped.
Scope/Condition of supply
All accessory parts are supplied mounted, depending on customer request.
